Paper Input Menu Parameters - Ricoh AP900 Software Manual

Making Printer Settings Using the Control Panel
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
C
Press the {U} or {T} key to display [Tray Priority], and then press the {#
Enter} key.
D
Press the {U} or {T} key to select a tray you want to use.
E
Press the {# Enter} key.
Wait for two seconds. The [Paper Input] screen appears.
F
Press the {Online} key.
The initial screen appears.

Paper Input menu parameters

This section explains about parameters that can be set on the Paper Input menu.
❖ Bypass Size
You can specify the paper size for Bypass tray.
For details about the size of paper loaded in the bypass tray, see "Paper and
Other Media Supported by This Printer", Printer Reference.
❖ Tray Paper Size
Paper size for tray 2, 3.
When you select sizes that are not indicated on the paper size dial of tray 2
or tray 3, you should set the dial to "p", and then select the paper size here.
For details about the size of paper loaded in each tray, see "Paper and Other
Media Supported by This Printer", Printer Reference.
❒ Only the installed trays appear on the display panel.
138