Ricoh AP900 Software Manual page 60

Preparing for Printing
If the CD-ROM drive is D, the source files of USB Printing Support are stored
in the following location:
D:DRIVESRPCSWIN2K_XP(Language)DISK1
I
Check the location, and then click [Next].
USB Printing Support is installed.
J
Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the "USB001" port is added to the [Printers]
window.
K
Click [Next >].
L
Click [Search for the best driver for your device. {Recommended}.], and then click
[Next >].
M
Select the [Specify a location:], check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
N
Insert the CD-ROM into the CD-ROM drive.
❒ When Auto Run starts, click [Exit].
❒ To disable Auto Run, press the {Shift} key when inserting the CD-ROM into
the drive and keep it pressed until the computer finishes reading from the
CD-ROM.
O
Specify the location where the source files of the printer driver is stored,
and then click [Next >].
If the CD-ROM drive is D, the source files of the printer driver are stored in the
following location:
• RPCS
D:DRIVESRPCSWIN2K_XP(Language)DISK1
• PCL 5e
D:DRIVESPCL5EWIN98_ME(Language)DISK1
• PCL 6
D:DRIVESPCL6WIN98_ME(Language)DISK1
• PostScript 3
D:DRIVESPS3WIN98_ME(Language)DISK1
P
Check the location, and then click [Next].
Add Printer Wizard starts.
Q
Click [Finish].
60