Installing The Pcl Or Rpcs Printer Driver (Netbeui) - Ricoh AP900 Software Manual

Preparing for Printing
A list of printers using TCP/IP appears.
L
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click [Specify address], and then enter the IP address
or host name of the printer.
Under Windows 95/98/Me, you cannot add an IP address partially similar to
the one already used. For example, if "192.168.0.2" is in use, "192.168.0.2xx"
cannot be used. Similarly, if "192.168.0.20" is in use, "192.168.0.2" cannot be
used.
M
Check that the port of the selected printer is displayed in [Port:].
N
Set a user code, if necessary.
This allows a SmartDeviceMonitor for Admin user to display and check statis-
tics about the number of sheets which each user prints. For details, see
SmartDeviceMonitor for Admin Help.
Up to 8 numeric characters can be entered. Neither alphabetic characters nor
symbols are available.
O
Select the [Default Printer] check box to configure the printer as default.
P
Click [Finish].
Installation starts.
Q
Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run. If
you still want to install the printer driver, install use [Add Printer]. See
"If a Message Appears during

Installing the PCL or RPCS Printer Driver (NetBEUI)

❒ To install this printer driver under Windows 2000, and Windows NT 4.0, you
must have an account that has Manage Printers permission. Log on as an Ad-
ministrators or Power Users group member.
❒ Windows XP and Windows Server 2003 do not support NetBEUI.
❒ You cannot print using printers beyond routers.
A
Quit all applications currently running.
Installation".
p.77
17