Staple - Ricoh AP900 Software Manual

Other Print Operations
To use the punch function, see
❒ Depending on the application, print settings may not be enabled and printed
output may not be as expected.
❖ When setting staple or collate in the printer driver, make sure that the Collate check
box is cleared in the application's [Print] dialog box.
If Collate is enabled in the application, printing will not be as intended.

Staple

With the optional finisher installed, sets can be stapled individually when printing
multiple sets.
Staple Position
The specified staple position varies depending on paper size, type, quantity and
feed orientation. The following table shows staple positions:
For paper sizes and maximum numbers of sheets available for stapling, see
"Specifications", Printer Reference.
For printing methods, see the printer driver Help.
The staple position will vary when using the PostScript 3 printer driver. For
more information, see the PostScript 3 printer driver Help.
Stapling Precautions
❒ Stapling can be done only with the optional finisher installed.
❒ Stapling cannot be done when paper is fed from the bypass tray.
p.121 "Punch".
119