Ricoh AP900 Software Manual page 20

Preparing for Printing
E
The software license agreement appears in the [License Agreement] dialog
box.
After reading the agreement, click [I accept the agreement], and then click [Next].
F
Select a printer driver you want to use in the [Printer Program] dialog box.
You can select several printer drivers.
G
Select the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H
Double-click the printer name to display the printer settings.
❒ The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
I
Click [Port:], and then click [Add].
J
Click [SmartDeviceMonitor], and then click [New Port...].
K
Click [IPP].
L
In the [Printer URL] box, enter "http://printer's address/printer" as the
printer's address.
If the server authentification is issued, to enable SSL( a protocol for encrypted
communication), enter "https://printer's address/printer" (Internet Explorer
5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://printer's address/ipp" as the printer's address.
M
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box
becomes the IPP port name.
N
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O
Check that the port of the selected printer is displayed in [Port:].
P
Set a user code, if necessary.
This allows a SmartDeviceMonitor for Admin user to display and check the
number of sheets each user prints. For details, see SmartDeviceMonitor for
Admin Help.
20