Ricoh AP900 Software Manual page 239

Monitoring and Configuring the Printer
Message
SMTPC: refused connect by smtp server.
SMTPC: no smtp server. connection close.
SMTPC: failed to connect smtp server.
SMTPC: username or password wasn't cor-
rect. [response code] (information)
Snmp over ip is ready.
Snmp over IP over 1394 is ready.
Snmp over ipx is ready.
SNMPD: account is unavailable:
Same account name be used.
Problem and solutions
Connection to the SMTP server is denied. This
could be because:
• A server other than the SMTP server has
been specified.
• The specified SMTP server port number is
incorrect.
Connection to the SMTP server failed due to
no response from SMTP. This could be be-
cause:
• A server other than the SMTP server has
been specified.
• The specified SMTP server port number is
incorrect.
Connection to the SMTP server failed. This
could be because:
• No connection to the network has been es-
tablished.
• The network configuration is incorrect, so
there is no response from the SMTP serv-
er.
• The specified SMTP server name is incor-
rect.
• An incorrect SMTP server is specified.
• The specified SMTP server IP address
could not be found in the DNS server.
• A server other than the SMTP server has
been specified.
• The specified SMTP server port number is
incorrect.
Connection to the SMTP server failed. This
could be because:
• The specified SMTP user name is incor-
rect.
• The specified SMTP password is incorrect.
Check the SMTP user name and password.
Communication over TCP/IP with snmp is
available.
Communication over IP over 1394 with snmp
is available.
Communication over IPX with snmp is availa-
ble.
User account is disabled. This could be be-
cause it use the same account name as the
administrator account.
239