Ricoh AP900 Software Manual page 152

Making Printer Settings Using the Control Panel
❒ Default: Auto Detect
❖ Sub Paper Size
You can select [Off] or [Auto] to enable the Sub Paper Size function. When
you select [Auto], the printer uses an alternative paper size if the currently
specified paper is not loaded. When you select [Off], the printer uses any size
paper in the current specified paper tray.
• Off
• Auto
❒ Default: Off
❖ Page Size
You can specify the default paper size.
× 14, 8 × 11, 5
1 1
8 / /
2 2
A4 (210 × 297), B5 JIS(182 × 257), A5 (148 × 210), A6 (105 × 148), 11 × 17,
A3 (297 × 420), B4 (257 × 364), Custom Size.
❒ Default:
• Metric version: A4 (210 × 297)
• Inch version: 8
❒ The initial paper size is applied when the paper size is not specified in the
print data.
❒ JIS stands for "Japanese Industrial Standard".
❖ Edge-Edge Print
You can print on the complete area of an A4 sheet leaving no border on any
egde.
• Off
• On
❒ Default: Off
❖ Def.Print Lang.
You can specify the initial printer language if the machine cannot detect the
printer language.
• PCL
• PS
• PDF
× 8 × 10
1 1 1
/ / , 7 /
2 2 4
× 11
1
/
2
, 8 × 13, 8 × 13, 8
1 1
/ /
2 2
× 13,
1
/
4
152