Configuring The Network Interface Board - Ricoh AP900 Software Manual

Monitoring and Configuring the Printer
Item
Result
Time
User ID
JobName
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell prnlog commands, see

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command.
Item
Common
mode
Protocol Up/Down
appletalk
TCP/IP
netware
SMB
IP over 1394
SCSI print
Ethernet interface
Syslog priority
NVRAM version
Description
Print Request Result
Communication Result
• OK
Print was completed normally. However, the print result may
not be as required due to printer problems.
• NG
Printing was not completed normally.
• Canceled
An "rcp", "rsh", or "lpr" command print request was canceled,
possibly due to the printing application. Not applicable to the
"ftp" or "rprinter" command.
Time the print requested was received.
Time of print request reception
Printer driver-configured User ID.
Appears when the print request ID is specified.
Name of the document for printing
Appears when the print request ID is specified.
Description
[up] means "active" and [down] means "inactive".
Internal version number
Internal version number
p.203 "prnlog".
229