Ricoh AP900 Software Manual page 153

Making Printer Settings Using the Control Panel
❒ Default: PCL
❖ Duplex
You can specify whether or not to print on both sides of a sheet.
• Off
• Short Edge Bind
• Long Edge Bind
❒ Default: Off
❒ This menu appears only when the optional duplex unit is installed.
❖ Blank Pages
You can specify whether or not to print blank pages.
• Do not print
• Print
❒ Default: Print
❖ Output Tray
You can select the default output tray.
• Fin. Upper Tray
• Fin. Shift Tray
• Finisher Tray 1
• Finisher Tray 2
❒ Default: Fin. Upper Tray
❖ Job Separation
You can enable Job Separation.
• On
• Off
❒ Default: Off
❖ Rotate 180 deg.
You can specify whether or not to rotate the paper by 180 degrees.
• On
• Off
153