Ricoh AP900 Software Manual page 155

Making Printer Settings Using the Control Panel
❖ Reset Time(sec)
• Reset Time
• 60 sec.
❖ Memory Usage
You can select memory to be used from "Font Priority" or "Frame Priority" ac-
cording to the paper size, resolution or printer language.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This seting uses memory for high speed printing.
❒ Default: Frame Priority
❖ Unit of Measure
You can specify the unit of measurement in "mm" or "inch" for the custom pa-
per size.
• mm
• inch
❒ Default value is destination dependant.
❖ Edge Smoothing
You can set whether edge smoothing is enabled. When it is on, jagged lines
appear more smoothly. Set it to off when the print image contains fine grada-
tion in tone.
• On
• Off
❒ Default: On
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if it is "On".
❖ Toner Saving
You can select whether or not Toner Saving is enabled
• Off
• On
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if it is "On".
155