Making Printer Settings Using the Control Panel
❖ Spool Printing
You can select whether or not all print data is spooled to the hard disk drive
before printing.
• Off
• On
❒ Default: Off
❒ Spooling temporarily stores a sent print job in the printer, and then prints it.
❒ First pages take longer to print when using spool printing.
❖ Spool Image
You can select whether or not the entire print image is spooled to the hard
disk.
• Off
• On
❒ Default: Off
❒ Spooling temporarily stores a sent print job in the printer, and then prints it.
❒ First pages take longer to print when using spool printing.
❖ Letterhead Mode
You can select the letterhead printing mode.
• Off
• Auto Detect
• On (Always)
❒ Default: Off
❖ Bypass Priority
When the different paper size or type is specified from the driver, you can
specify which setting is given priority to, machine setting or command.
• Machine
• Driver/Command
❒ Default: Driver/Command
❒ Appear only at network standard model.
❖ Email Date
When a mail date/time cannot be notified, the user can set whether a dummy
date/time is set or not.
• Off
156