Table of Contents
Advertisement
G G G G
Holding the green handle, pull
up the Fusing Unit slowly in the
direction of the arrow, and then
put it in a stable and level place.
H H H H
Take out the new Fusing Unit
from the bag and put it in a stable
and level place.
Important
❒ The A3 paper which comes with
the new Fusing Unit will be
used in a later step, so be careful
not to lose it.
❒ Do not turn the blue dial at the
side of the new fusing unit
when replacing it or before
turning on the power switch.
I I I I
Remove the Fuser Oil Unit in the
direction of the arrow.
Important
❒ Do not touch inside of the Fus-
ing Unit.
❒ Be careful not to touch the oil.
J J J J
Match (U U U U ) on the front of the Fus-
er Oil Unit and the arrow on the
Fusing Unit as shown in the illus-
tration.
ZDJH208J
Important
❒ Be careful not to get oil on the
metal point of the left side of the
Fuser Oil Unit.
K K K K
Insert the left and right protru-
sions of the Fuser Oil Unit into
the white holders of the Fusing
Unit (A A A A ), and then move the Fus-
er Oil Unit in the direction shown
by the arrow (B B B B ) to attach the Fus-
er Oil Unit to the Fusing Unit.
L L L L
Put the removed Fuser Oil Unit in
the bag that enclosed the new
Fusing Unit, and then seal it.
ZDJH052E
Replacing the Fusing Unit
ZDJH055J
ZDJH054J
5
81
Advertisement
Table of Contents
