Table of Contents
Advertisement
Status
It takes too much time to com-
plete the print job.
It takes too much time to resume
printing.
Multiple pages are fed through
the printer at once.
Output are not delivered to the
selected tray you require.
Paper misfeeds occur frequently. Check that the side guide of the Paper Tray is locked.
Solid areas, lines or text are
shiny or glossy when created as
a mixture of cyan, magenta, yel-
low.
Solid lines are printed as broken
lines.
Possible Causes, Descriptions, and Solutions
If "Warming Up... " appears on the panel display, the printer
is now warming up. Wait for a while.
Note
❒ To maintain the best quality, color adjustment is executed
regularly during printing or after printing. Even if print-
ing is not specified, color adjustment is sometimes exe-
cuted regularly when the power is on.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data processing is
being done. Just wait until it resumes.
The printer might be warming up from the Energy Saver
mode. It takes time until printing starts.
Paper misfeeds easily when the Paper Feed Roller is dirty.
Contact your sales or service representative to replace the Pa-
per Feed Roller.
When using the bypass tray, the size selected on the display
panel might be different from actual paper size. Select the
correct paper size.
See p.1 "Paper and Other Media Supported by This Printer".
When you are using a Windows operating system, the print-
er driver settings override those set using the control panel.
Set the desired output tray using the printer driver.
See p.12 "Loading Paper".
The paper size and feed direction of the paper in the Bypass
Tray might not be the same as those you selected with the
control panel. Check the settings on the control panel, and
load paper of the correct paper size and feed direction.
See p.15 "Load Paper in the Bypass Tray".
Check that the paper guide of the Paper Tray is attached
properly.
• PCL 5c
Adjust [Color Setting] setting under the [Fiery Printing] tab
in the printer driver.
• PostScript
Adjust [Color Wise] setting under the [Fiery Printing] tab in
the printer driver.
• PCL 5c
Adjust [Color Setting] setting under the [Fiery Printing] tab
in the printer driver.
• PostScript
Adjust [Color Wise] setting under the [Fiery Printing] tab in
the printer driver.
Other Printing Problems
4
51
Advertisement
Table of Contents
