Table of Contents
Advertisement
Troubleshooting
Messages/Second messages
Remove Misfeed W: Mailbox
/Open Mailbox Cover
Remove Misfeed Y: Paper Tray
/See Instructions in Front
Cover
Remove Misfeed Z1: Duplex
Unit
4
/See Instructions in Front
Cover
Remove Misfeed Z2:
Dup.Feed Unit
/See Instructions in Front
Cover
Remove Paper All Output
Trays
Remove Paper Finisher Tray # The indicated finisher shift
Remove Paper Inside Finisher There is still paper in the fin-
Remove Paper Mailbox Tray # The output tray # of the op-
Remove Paper Standard Tray
Replace Black Dev.
Unit(TypeD)
44
Description
There is a misfeed in the out-
put 4-bin tray.
There is a misfeed in the spec-
ified input tray, or the printer
is not feeding paper.
There is a misfeed in the du-
plex unit.
There is a misfeed in the du-
plex feed unit.
All output trays are full.
tray is full. #:finisher shift tray
number
isher.
tional 4-bin Mailbox is full.
#:mailbox tray number
The standard output tray is
full
It is time to replace the black
development unit.
Solution
Open the mailbox cover and
remove misfeed.
For more information, see
p.56 "When "Remove Misfeed
W: Mailbox" Appears".
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
For more information, see
p.58 "When "Remove Misfeed
Y: Paper Tray" Appears".
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
For more information, see
p.59 "When "Remove Misfeed
:Duplex Unit " Appears".
Remove the misfed paper.
See p.96 "Removing Misfed
Paper in the Duplex Feed
Unit".
Remove paper from all output
trays.
Remove the paper from the in-
dicated finisher shift tray.
Open the cover for the finisher
and remove paper.
Remove paper from the indi-
cated 4-bin Mailbox tray.
Remove paper from standard
output trays.
Replace a new black develop-
ment unit.
Depending on your service
contract, contact your sales or
service representative.
See p.63 "Replacing Consum-
ables and Maintenance Kit".
Advertisement
Table of Contents
