Table of Contents
Advertisement
Messages/Second messages
Load Paper Tray #
Load
Tray #
Paper Size
Media Type
Punch-Hole Chips Are Full
Remove Misfeed A:Internal
Path
/See Instructions in Front
Cover
Remove Misfeed B: Fusing
Unit
/See Instructions in Front
Cover
Remove Misfeed R: Finisher
/Open Finisher Cover
Error & Status Messages on the Control Panel
Description
The indicated tray is out of pa-
per.
#: tray number
The paper size or media type
set in the indicated tray differs
from the setting made.
#: tray number
The punch waste box is full of
punch chips.
There is a misfeed in the printer. Remove the misfed paper fol-
There is a misfeed in the fus-
ing unit.
There is a misfeed in the fin-
isher.
Solution
Load paper into the indicated
paper tray.
Load {paper size and media
type} paper into the tray, and
then change the paper size
and type with the operation
panel.
Or press { { { { Enter #} } } } , and then
select the tray with the control
panel.
Or press{ { { { Cancel} } } } to cancel the
print job.
Remove the punch chips from
the punch waste box.
See p.62 "Removing Punch-
hole Chips"
When the message appears
even if the punch waste box is
not full, remove the Punch-
hole chips on the top of the
punch waste box.
See p.62 "When the message
appears even after removing
the Punch-hole chips"
lowing the instructions inside
the front cover.
For more information, see
p.54 "When "Remove Misfeed
A:Internal Path" Appears".
Remove the misfed paper fol-
lowing the instructions inside
the front cover.
For more information, see
p.55 "When "Remove Misfeed
B: Fusing Unit" Appears".
Open the finisher cover and
remove misfeed.
For more information, see
p.56 "When "Remove Misfeed
R: Finisher" Appears".
4
43
Advertisement
Table of Contents
