Table of Contents
Advertisement
F F F F
Lift the inner cover until it clicks
into place and holds.
The Development Unit is installed
shown in the illustration. Starting
from the upper left, the units are at-
tached in the order of black (K), yel-
low (Y), cyan (C), and magenta (M).
G G G G
Remove the Development Unit.
The procedure for removing the
unit is the same for all four colors.
A Hook your finger on the green
tab in front of the Develop-
ment Unit you want to replace,
and pull it out halfway.
Important
❒ Pulling out the Development
Unit quickly might cause it to
drop.
B Hold the right side of the De-
velopment Unit with your
right hand, and pull out the
unit slowly.
ZDJH016J
Important
❒ Be careful not to touch the
right side of the Photocon-
ductor Unit.
❒ Be careful not to let it get in
contact with your hands or
clothes.
H H H H
ZDJH046J
Install a new Development Unit.
The procedure for attaching the
Development Unit is the same for
all four colors.
A Take the unit out from the bag.
ZDJH225J
Replacing the Development Unit
ZDJH993J
ZDJH226J
5
77
Advertisement
Table of Contents
