Table of Contents
Advertisement
Troubleshooting
Messages/Second messages
Replace Fusing
Unit soon (TypeC)
Replace Waste Toner (Type E) It is time to replace the waste
Reset Develop. Unit Correctly
4
/Yellow/Magenta Cyan/Black
Reset Duplex Unit Correctly
Reset Finisher Correctly
Reset Fuser Oil Unit Correctly The fuser oil unit is not set cor-
Reset Fusing Unit Correctly
Reset PCU Correctly
/Yellow/Magenta Cyan/Black
Reset Toner Black
Reset Toner Cyan
46
Description
The fusing unit should be re-
placed soon.
toner.
The indicated development
unit(s) is/are not set correctly,
or is not set.
The duplex paper feed unit is
not set correctly or is not set.
Finisher is not set correctly, or
is not set.
rectly, or is not set.
There is no fusing unit, or the
fusing unit is not installed cor-
rectly.
The indicated Photoconductor
Unit(s) is/are not set correct-
ly, or is not set.
The indicated toner cartridge
is not set correctly.
The indicated toner cartridge
is not set correctly.
Solution
Prepare a new fusing unit. De-
pending on your service con-
tract, contact your sales or
service representative.
See p.63 "Replacing Consum-
ables and Maintenance Kit".
Replace a new fusing unit.
Depending on your service
contract, contact your sales or
service representative.
See p.63 "Replacing Consum-
ables and Maintenance Kit".
Set the indicated development
unit(s) correctly. See p.63 "Re-
placing Consumables and
Maintenance Kit".
Remove and reinstall the du-
plex paper feed unit. If the er-
ror continues, contact your
sales or service representative.
See "Setting Up" in the Setup
Guide.
Set the finisher correctly.
See "Setting Up" in the Setup
Guide.
Set the fuse oil unit correctly.
See p.63 "Replacing Consum-
ables and Maintenance Kit".
Set the fusing unit correctly.
See p.63 "Replacing Consum-
ables and Maintenance Kit".
Set the indicated Photocon-
ductor Unit(s) correctly.
See p.63 "Replacing Consum-
ables and Maintenance Kit".
Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Set the indicated toner car-
tridge(s) correctly.
See "Setting Up" in the Setup
Guide.
Advertisement
Table of Contents
