Domainname; Help - Ricoh Aficio MP161 Network Manual

❖ A records registration
m s h > d n s a r e c o r d { d h -
cp|own}
• {dhcp}
You can specify the method of
registering an A record when
the dynamic DNS function is
enabled and DHCP is used.
• {own}
To register an A record using
the printer as the DNS client.
The DNS server address and the
domain name already designat-
ed are used for the registration.
❖ Record updating interval settings
msh> dns interval "time"
• You can specify the interval af-
ter which records are updated
when using the dynamic DNS
function.
• The updating interval is speci-
fied hourly. It can be entered be-
tween 1 and 255 hours.
• The default is 24 hours.

domainname

Use the "domainname" command to
display or configure the domain
name settings.
You can configure the Ethernet inter-
face or IEEE 802.11b interface.
❖ View settings
The following command displays
the current domain name:
msh> domainname
❖ Interface domain configuration
m s h >
"interface_name"
d o m a i n n a m e
Remote Maintenance by telnet
❖ Setting the Domain Name
msh> domainname "interface_
name" name "domain name"
• A domain name can be entered
using up to 63 alphanumeric
characters.
• The Ethernet interface and IEEE
802.11b interface will have the
same domain name.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface
ether
wlan
❖ Deleting the Domain Name
msh> domainname "interface_
name" clear name

help

Use the "help" command to display
the available command list and the
procedures for using those com-
mands.
❖ Command list display
msh> help
❖ Display of procedure for using com-
mands
msh> help "command_name"
Interface set
Ethernet interface
IEEE 802.11b inter-
face
2
57