Bonjour(Rendezvous) - Ricoh Aficio MP161 Network Manual

bonjour(rendezvous)

Use the "bonjour(rendezvous)" com-
mand to display bonjour(rendez-
vous)-related settings.
❖ View settings
Bonjour settings are displayed.
msh> bonjour
❖ Bonjour service name setting
You can specify the bonjour serv-
ice name.
msh> bonjour cname "compu-
ter name"
• The computer name can be en-
tered using up to 63 alphanu-
meric characters.
❖ Bonjour Installation location informa-
tion setting
You can enter information about
the location where the printer is in-
stalled.
msh> bonjour location "lo-
cation"
• Information about location can
be entered using up to 32 alpha-
numeric characters.
❖ Setting order of priority for each pro-
tocol
• diprint
msh> bonjour diprint [0–
99]
• lpr
msh> bonjour lpr [0–99]
• ipp
msh> bonjour ipp [0–99]
You can specify the order of prior-
ity for "diprint", "lpr", and "ipp".
Smaller numbers indicate higher
priority.
Remote Maintenance by telnet
❖ IP TTL setting
msh> bonjour ip ttl {1-255}
You can specify the IP TTL (the
number of routers a packet can
pass through).
Note
❒ The default is 255.
❖ Resetting the computer name and lo-
cation information
You can reset the computer name
and location information.
msh> bonjour clear {cname
| location}
• cname
Reset the computer name. The
default computer name will be
displayed when the computer is
restarted.
• location
Reset the location information.
The previous location informa-
tion will be deleted.
❖ Interface configuration
msh> bonjour linklocal
"interface_name"
• If many types of interface are in-
stalled, configure the interface
that communicates with linklo-
cal address.
• If you do not specify an inter-
face, the Ethernet interface is
automatically selected.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface
ether
wlan
Interface configured
Ethernet interface
IEEE 802.11b inter-
face
2
53