Registering Additional Devices - Miller Auto Continuum 500 Owner's Manual

10-9. Registering Additional Devices

1. Log in to Insight Core website at
2. Click on the Configuration tab (See Figure 10-20).
3. On the Configuration tab, click on the Register New Device button.
4. Enter the information for the new device you intend to register.
5. A confirmation screen will appear. If the information is correct, click on the Save button (see Figure 10-21).
6. After registration, the device will appear inside the corporate asset tree and begin displaying activity as operators begin welding with this power
source.
https://insight.millerwelds.com/
Figure 10-20. Configuration Screen
MC10001Z
AC1000000X1X1X00XX00X0XX
Figure 10-21. Register Device Confirmation Screen
.
OM-277115 Page 65