Registering Initial Device And Creating An Account - Miller Auto Continuum 500 Owner's Manual

10-8. Registering Initial Device And Creating An Account

1. Open a web browser and navigate to
2. Fill in all information shown in Figure 10-18. Use serial number and license key from Section 10-7.
.
If this device is an additional module to be added to your existing fleet already registered, click Log In button and proceed to Section 10-9.
3. After clicking on the Register button, the homepage for the company that was just created will appear (see Figure 10-19).
.
To register additional devices proceed to Section 10-9.
OM-277115 Page 64
https://insight.millerwelds.com/registration
License Key
From Step #2
Figure 10-18. Registering A New Account
Figure 10-19. Insight Core Company Dashboard
.
Serial Number
MC10001Z
AC1000000X1X1X00XX00X0XX