Section 10 − Insight Coret Installation; License Agreement; Downloading Connectivity Survey; Obtaining System Ip Address - Miller Auto Continuum 500 Owner's Manual

SECTION 10 − INSIGHT COREt INSTALLATION
7

10-1. License Agreement

You have acquired a device (Insight Core) which includes software licensed by Miller Electric Mfg. Co. Such software products, as well as associated
media, printed materials, and "online" or electronic documentation for such software are protected by international intellectual property laws and
treaties. The software is licensed, not sold. All rights reserved.

10-2. Downloading Connectivity Survey

In order to ensure proper connectivity, visit the Insight Core Download page at
Download and print the Network Connectivity Survey Form.
Ask your corporate IT department to complete the survey.

10-3. Obtaining System IP Address

.
The factory default IP address of all Continuum systems is 169.254.0.2.
.
Ethernet and WiFi connections each have their own unique IP addresses.
.
The power source must be on the same Subnet as the computer used to access the Continuum's web pages.
1. Connect your Continuum Welding System per the instructions in the power source Owner's Manual.
2. Connect an Ethernet cable between your computer and the power source.
3. Turn the welding power source on.
4. From the Feeder (or pendant) main menu screen, go to the Ethernet Settings screen. Using the scroll knob, select System, then Network
Settings, then Ethernet Settings. Note the IP address.
Home Internet
Program # 1
MIG
.035 Steel ER70
Ar 90 CO2 10
35ST MIG
Setup Logs
Home > System > Network
Network Menu
Ethernet Settings
WiFi Settings
Home System
WiFi Ethernet
Status System
Back
Figure 10-1. Obtaining IP Address
https://insight.millerwelds.com/download
Home > System
System Menu
Factory Reset
USB Functions
System Software Revision
Network Settings
Home
Home > System > Network > Ethernet
Ethernet Settings
Item
MAC
IP Mode
IP Address
Subnet Mask
Network Gateway
DHCP Server
DNS Server
Port
Home System
.
Back
Value
7C:66:9D:49:30:F3
Dynamic
169.254.0.2
255.255.0.0
10.43.254.250
10.50.10.2
10.50.10.5
80
Back
OM-277115 Page 53