Determining Device Serial Number And License Key - Miller Auto Continuum 500 Owner's Manual

10-7. Determining Device Serial Number And License Key

.
Obtaining the device serial number and license key is necessary for product registration. Registration will activate your Insight Core account and
give access to all Insight Core data.
1. Insert a USB drive into the front port on the Continuum Feeder.
2. From the feeder (or pendant) main menu, select System to bring up the System menu. Using the scroll knob, select USB Functions, then Write
to USB, then License Key, then Yes to save the license key and serial number data. This process will load an IP_MAC file onto the USB drive,
which contains the unique license key for your system.
Home Internet WiFi
Program # 1
MIG
.035 Steel ER70
Ar 90 CO2 10
35ST MIG
Setup Logs Status
Home > System > USB > Write to USB
Write to USB Functions
System Settings
License Key
Diagnostic File
Home
OM-277115 Page 62
Figure 10-13. Continuum Feeder USB Location
Home > System
Ethernet
System Menu
Factory Reset
USB Functions
System Software Revision
Network Settings
Home
System
System Back
Figure 10-14. Obtaining Serial Number And License Key
1
Home > System > USB
USB Functions
Write to System
Write to USB
System
Back
Home
Home > System > USB > Write to USB > License
License File
Write License File to USB?
No
Yes
Warning: save license file will be lost.
Home System
1 USB Port
Ref. 259144-D
Back
Back