Section 5 − Installation; Selecting A Location - Miller Auto Continuum 500 Owner's Manual

5-1. Selecting A Location

Movement
1
OR
Location And Airflow
18 in.
(460 mm)
Notes
OM-277115 Page 16
SECTION 5 − INSTALLATION
OR
2
3
!
4
!
1
2
Use lifting eye or lifting forks to move unit.
18 in.
(460 mm)
If using lifting forks, extend forks beyond
opposite side of unit.
3
Use cart or similar device to move unit.
4
Locate unit near correct input power supply.
Visit www.youtube.com/
MillerWelders
informational videos.
!
Do not move or operate
unit where it could tip.
Special installation may be required
where gasoline or volatile liquids are
present − see NEC Article 511 or CEC
Section 20.
Do not stack units. Beware of tipping.
Lifting Eye
Lifting Forks
Hand Cart
Line Disconnect Device
Loc_continuum 2018-08
for