Verifying Network Connection - Miller Auto Continuum 500 Owner's Manual

10-6. Verifying Network Connection

.
It can take up to five minutes for a WiFi network to connect the first time.
To verify the network connection, reference the feeder (or pendant) display. If a WiFi connection is being used, the box next to WiFi should be yellow. If
an Ethernet connection is being used, the box next to Ethernet should be yellow. Only one (Ethernet or WiFi) is required to establish a network connec-
tion. Once the network is identified, the box next to Internet should be green.
To review settings from the feeder, go to the Ethernet Settings screen. Using the scroll knob, select System, then Network Settings, then either
Ethernet Settings or WiFi Settings.
Home
MIG
.035 Steel ER70
Ar 90 CO2 10
35ST MIG
Setup
Home > System > Network
Network Menu
Ethernet Settings
WiFi Settings
Home System
Home Internet WiFi
Program # 1
MIG
.035 Steel ER70
Ar 90 CO2 10
35ST MIG
Setup Logs Status
Figure 10-11. Verifying Network Connection
Internet WiFi
Program # 1
Logs Status
Back
Figure 10-12. Verifying Network Connection
1 2 3
Ethernet
System
Home > System
Ethernet
Home
System
Item
MAC
IP Mode
IP Address
Subnet Mask
Network Gateway
DHCP Server
DNS Server
WiFi Port
Home
1 Internet Connection
Indicator (Green When
Connected)
2 WiFi Connection Indicator
(Yellow When Connected)
3 Ethernet Connection
Indicator (Yellow When
Connected)
System Menu
Factory Reset
USB Functions
System Software Revision
Network Settings
Back
Review settings here.
Value
7C:66:9D:49:30:F3
static
192.168.1.2
255.255.255.0
192.168.1.2
192.168.1.1
8.8.8.8
80
System Back
OM-277115 Page 61