Arc Management Screen - Miller Auto Continuum 500 Owner's Manual

8-5. Arc Management Screen

4
7
1 Active Program
Displays the program number, process, wire
size and alloy, and gas. Edit button allows
these parameters to be changed.
2 Commands
Displays current user changeable commands.
Depending on the weld process being used
these commands will vary. Edit button allows
parameters to be changed.
3 Weld Sequence
Displays active weld sequence parameters.
OM-277115 Page 44
1
Edit button allows changes to these parame-
ters. Parameter limits are also set through this
menu.
4 Lock Status
Displays the current status of system locks.
Edit button allows the lock configuration to be
changed.
5 Program Enable
Edit button allows user to select which pro-
grams are available for use.
2
3
5
6
6 Weld Processes
Displays available weld processes. Edit but-
ton allows processes to be enabled or dis-
abled.
7 Program Naming
Edit button allows user to enter a short person-
alized name for a weld program and a longer
description of what the program is for. Both
fields must have data entered. The short name
will then be viewable on the LCD screen on the
User Interface of the Continuum.