D-Link NUCLIAS DNH-100 User Manual page 90

Nuclias Connect Software User Manual
Nuclias
The Connection tab displays device access address, port, and SSL certificate settings.
Navigate to System > Settings and click the Connection tab to display the relevant information.
In the Connection Setting section, the following parameters can be configured:
Parameter
Device Access Address
Device Access Port
Web Access Port
Click Save to save the values and update the screen.
In the Update SSL Certificate section, the following parameters can be configured:
Parameter
Upload Certificate From
File
Upload Key From File
Click Save to save the values and update the screen.
System
Description
Enter the Nuclias Connect Server application's IP address.
To manage remote APs, the IP address must be a public
IP address; IP mapping is required for instances behind a
firewall or router.
Enter the Nuclias Connect server application's listen
port number. The default value is 8443. For remote AP
management behind a firewall or router, the inbound port
must be opened.
The web access ports as defined during the installation.
The values are predefined.
Description
Click Browser... to select the SSL certificate file located
on the local drive that will be uploaded.
Click Browser... to select the SSL key file located on the
local drive, that will be uploaded.
Page 90
Settings
Nuclias Connect Configuration
Connection