D-Link NUCLIAS DNH-100 User Manual page 47

Nuclias Connect Software User Manual
Nuclias
VLAN
The VLAN page shows the configurable settings of a network's virtual LAN subnetwork settings. Navigate to Configuration >
Profile Settings > [Site] > [Network] > VLAN to view existing settings.
Click Save to save the values and update the screen.
The VLAN List tab will show a list of all created VLANs.
Click to modify an existing VLAN.
Click to remove an existing VLAN.
In the Port List tab, a list of port assignments is displayed. The list indicates the available tagged and untagged ports available
on the access points in the network.
In the columns next to the Port Name entries, the Tag/Untag ID columns indicate if the port is a tagged member (Tag VID) or
an untagged member (Untag VID) of the VLAN. In the last column, the port VLAN ID shows the connected virtual LAN segment.
In the Add/Edit VLAN tab, we can create a new VLAN and assign untagged ports in that VLAN. Click the Modify icon in the VLAN
List tab to modify an existing VLAN.
In the PVID Setting tab, you can view and configure the Port VLAN Identifier (PVID) settings for access points and wireless client
in this network.
In the IP Interface List tab, you can view a summary of IP Interface. The following information is listed: VLAN VID, VLAN Name,
Get IP Address From, and IP Address. Under the action field, click
In the Add/Edit IP Interface tab, you can add or edit IP interface. The following fields are presented: VLAN VID, Get IP Address
From, IP Address, Subnet Mask, Gateway, and DNS. Click Save to save your changes.
Once the settings are updated, the configuration must be uploaded to the access points. See "Profile Settings" on page 41 for
further information.
Configuration
Field Description
VLAN Status
Click the drop-down menu to enable or
disable VLANs.
Profile Settings
to revise, or click
Page 47
Nuclias Connect Configuration
Access Point
to delete.