Nuclias Connect Configuration; Wizard - D-Link NUCLIAS DNH-100 User Manual

Nuclias Connect Software User Manual
A wizard is available to guide you through first-time setup of the device. If at any time you wish to re-run the wizard, you can
click on the icon on the top right to start the wizard.
When wizard is activated, a string of settings prompt will appear.
In the System Settings window, configure the following:
Parameter
Device Access
Address
Device Access
Port
Web Access
Port
Country
Once the system settings has been configured, click Next to continue. The Add Network page will appear:
In the Add Network window, configure the following:
Parameter
Site
Network Name
Network ID
Once the network settings has been configured, click Next to continue or Exit to return to the previous step.

Nuclias Connect Configuration

Wizard

Description
Enter the Nuclias Connect Server application's IP address. To manage
remote APs, the IP address must be a public IP address; IP mapping
is required for instances behind a firewall or router.
Enter the Nuclias Connect server application's listen port number.
The default value is 8443. For remote AP management behind a
firewall or router, the inboud port must be opened.
The web access ports as defined during the installation. The values
are predefined.
Select the designated country from the drop-down menu.
Description
From the Site drop-down menu, select an existing site or new Site
and enter the name of the site in the field.
Enter a name to identify the new network.
The Network ID is an optional field. It will be used on REST API
function. Leave it as blank if not using REST API.
Page 9
Nuclias Connect Configuration