D-Link NUCLIAS DNH-100 User Manual page 16

Nuclias Connect Software User Manual
Nuclias
Neighbor AP
Navigate to Monitor > Access Point > Neighbor AP on the left panel to view the neighbor AP list. To
enable this function, go to Configuration>Profile Settings>Site>Network>Wireless Resource>Neigh-
bor AP Detection and click Enabled.
Field
BSSID
Detected by
Status
SSID
Security
RSSI
BW(MHz)
Channel
Supported Modes
Monitor
Description
Displays the MAC address of the AP's wireless interface.
Displays the mac address of AP that the AP was scanning.
Displays the status of AP (Unknown, Known, and Managed).
Displays the name of the wireless network.
Displays the security status indicating whether encryption is
used.
Displays the RSSI that the AP was detecting.
Displays the channel width that the AP was using.
Displays the channel setting that the AP was detected on.
Displays the list of modes that the AP was supported.
Page 16
Access Point
Nuclias Connect Configuration
Wireless Client