D-Link NUCLIAS DNH-100 User Manual page 43

Nuclias Connect Software User Manual
Nuclias
SSID
In the Access Control section, the following parameters can be configured:
ACL Settings
Action
MAC Address
Upload MAC Address
List
IP Filter Settings
Action
IP Address
Subnet Mask
In the User Authentication section, the following parameters can be configured:
Field
Authentication Type
Idle Timeout (2~1440)
Enable White List
MAC Address
Upload Whitelist File
IPIF Status
VLAN Group
Get IP Address From
IP Address
Subnet Mask
Gateway
DNS
Username
Password
Configuration
Description
Click the drop-down menu to select the action that will applied to
the clients.
Enter the MAC address of the clients that will be allowed or denied
access and click Add.
Click Browser... to select the MAC address file, located on the local
computer, that will be uploaded. Click Upload to update the MAC
address list. Click Download to download the current MAC address
list.
Description
Click on the drop-down menu to enable or disable the IP filter
function.
Enter the IP address.
Enter the subnet mask.
Description
Click the drop-down menu to select the authentication type applied
to the wireless client. (Web redirection only, User name/Password,
Remote Radius, LDAP, POP3, Passcode, External Captive Portal, MAC
address, Click through and Social Login)
Enter the session timeout value.
Check the box to enable the white list function. This function is only
available when Authentication Type is Username/Password.
Enter the MAC address of the network device that will whitelisted and
click Add to add the address to the white list table. This function is
only available when Authentication Type is Username/Password.
Click Browser... to select the white list file, located on the local
computer, that will be uploaded. Click Upload to update the white
list. Click Download to download the current white list. The function
is only available when Authentication Type is Username/Password.
Click the drop-down menu to enable or disable the use of the IP
interface.
Enter the VLAN group name.
Click the drop-down menu to select the IP address configuration
setting.
Enter the IP address of the IP interface.
Enter the subnet mask of the IP interface.
Enter the gateway of the IP interface.
Enter the preferred DNS address of the IP interface.
Enter the username. The function is only available when
Authentication Type is set as Username/Password.
Enter the password and click Add. Click Clear to clear the entered
fields. This function is only available when Authentication Type is
Username/Password.
Profile Settings
Page 43
Nuclias Connect Configuration
Access Point