D-Link NUCLIAS DNH-100 User Manual page 24

Nuclias Connect Software User Manual Nuclias Connect Configuration
Nuclias Connect Monitor Switch Device Detail Page
IP Interface
Under the IP Interface tab, you can configure the IPv4 interface and view a summary of their statuses. To create an IPv4 in-
terface, go to IPv4 Interface, select a VLAN ID, and choose to Enable or Disable the interface admin state. Enter an IPv4 IP
address and Netmask. Click Add to apply the IP interface to a VLAN, or Clear to remove the entered values.
In the IPv4 Interface Table, a summary containing VLAN ID, State, IP Address, and Link Status is displayed. Beneath the Action
field, click to edit, or to delete. Click Apply to save the changes.
Page 24