D-Link NUCLIAS DNH-100 User Manual page 45

Nuclias Connect Software User Manual
Field
Choose Template
In the Hotspot 2.0 section, the following parameters can be configured:
Please note that Hotspot 2.0 is only available for compatible models and specific firmware version.
Block
Hotspot 2.0
OSEN
Allow Cross Connection
Manage P2P
DGAF
Proxy APR
L2TIF
Interworking
Access Network Type
Internet
ASRA
ESR
USEA
Venue Group
Venue Type
Venue Name
HESSID
WAN Link Status
WAN Symmetric Link
WAN At Capacity
WAN Metrics DL Speed
(kps)
5 As of the time of writing, only DAP-2662 and DAP-3666 support this function.
Description
Click the drop-down menu to select the used login style. This
function is only not available when Authentication Type is set to
Web Redirection Only.
Note:
• Click Preview to preview the selected style.
• Click Upload Login File to upload a new style.
• Click to delete the selected style.
• Click to download the style template.
Description
Click the drop-down menu to enable or disable hotspot 2.0.
Enable OSU Server-only authenticated layer-2 Encryption Network
(OSEN) to indicate that the hotspot uses a OSEN network type.
Choose enable to allow cross connection for
clients.
Choose enable to allow P2P.
This option configures the Downstream Group Addressed
Forwarding. Choose enable to allow AP to forward downstream
groupaddressed frames.
Choose enable to allow proxy ARP.
Choose enable to allow Layer 2 Traffic Inspection and Filtering.
Choose enable to enable the interworking function.
Choose from drop-down menue the access network type.
Choose to enable or disable Internet access for this network.
Choose enable if the network has Additional Steps required for
Access.
Choose enable to indicate that emergency services are reachable
through this device.
Choose to enable or disable USEA.
Specify group venue belongs to.
Specify type of venue.
Specify name of venue. Choose from the drop down list a language
used in the name.
Specify a homogenous extended service set (ESS) ID that can be
used to identify a specific service provider network.
Set information about the status of the Access Point's WAN
connection from the drop-down menu.
Specify state of the WAN link is symmetric (upload and download
speeds are the same).
Specify yes if the Access Point or the network is at its max capacity,
or specify no if not.
The downlink speed of the WAN connection set in kbps. If the
downlink speed is not known, set to 0.
Page 45
Nuclias Connect Configuration
5