D-Link NUCLIAS DNH-100 User Manual page 42

Nuclias Connect Software User Manual
Nuclias
SSID
The SSID page displays the configurable parameters of a network's wireless settings. Navigate to Configuration > Profile
Settings > [Site] > [Network] > Access Point > SSID to view existing settings. If the device type of the profile chosen is an
Access Point, the following options are displayed: SSID, VLAN, Bandwidth Optimization, RF Optimization, Schedule, Device
Settings, Performance, WLAN Partition, and Wireless Resource.
In the Security section, the following parameters can be configured:
Wireless Settings
Band
Index
SSID
SSID Broadcast
Security
WMM (Wi-Fi
Multimedia)
Fast Roaming
Security Settings
Encryption
Key Size
Key Type
Key Value
Configuration
Description
Click the drop-down menu to select wireless frequency band.
Click the drop-down menu to select SSID index (Parameters: Primary,
SSID 1 to SSID 7). To create a new SSID, select the index parameter first.
Enter the wireless network name. The SSID must be the same across
all frequencies. In addition, make sure the network name (SSID) on
the selected access point is the same as the defined network name
(SSID) on the Nuclias Connect. For further information, see the access
point Basic > Wireless settings and Advanced Settings > DHCP Server
> Dynamic Pool Settings, to ensure the Domain Name field reflects the
defined network name (SSID) on the Nuclias Connect.
Click the drop-down menu to enable or disable the wireless SSID
visibility.
Click the drop-down menu to select the wireless security protocol:
Open System (no pre-shared key required), WPA-Personal, WPA
Enterprise (Radius server required), WPA2-Personal, WPA2-Enterprise
(Radius server required), WPA-Auto-Personal, WPA-Auto-Enterprise
(Radius server required).
Click the drop-down menu to enable or disable the Wi-Fi multimedia.
Click the drop-down menu to enable or disable fast roaming. This
function is only available for compatible models and specific software
version.
Description
Click the drop-down menu to enable or disable WEP Open System
encryption. The function is only available when Security is set as
Open System.
Click the drop-down menu to select the WEP key size.
Click the drop-down menu to select the WEP key type.
Enter the open system WEP encryption key.
Profile Settings
Page 42
Nuclias Connect Configuration
Access Point