D-Link NUCLIAS DNH-100 User Manual page 14

Nuclias Connect Software User Manual Nuclias Connect Configuration
Nuclias Monitor Access Point Wireless Client
Connected Clients
Navigate to Monitor > Access Point > Wireless Client, the Connected Clients tab is displayed. A detail summary of all connected
clients managed by the application can be viewed. Three filters can be applied to narrow the scope of connected clients: Site,
Network, and Clients.
The following figure shows a typical summary. Use the filters to select a specific site, network and client. Additionally, you can
enter a keyword related to the target device in the Search field. Next, select a searching criteria (Mac address, IP Address, User
Authentication). Any relevant devices meeting the search criteria will be listed.
All wireless clients connected to the access points that are managed by this application are displayed. Information such as Site,
Network, IP Address, IPv6 Address, MAC Address, Auth. Type, OS (only available on captive portal clients), Upload,
Download, Channel, RSSI (dBm), SNR (dB), Band, SSID, AP MAC Address, Traffic Usage, Traffic Usage(%), Last Seen, and
Uptime is displayed for each wireless client.
Page 14