D-Link NUCLIAS DNH-100 User Manual page 10

Nuclias Connect Software User Manual Nuclias Connect Configuration
The Network Configurations page is displayed. Under the General Settings tab, select a country, time zone, and the device
type that will be managed in the network.
When Access Point is selected, the following configuration will appear:
When Switch is selected as the device type, the following configuration will appear:
When the network configurations is defined, click Next to continue, or click Back to return to the previous page.
The Discover Network Settings page is displayed. Select the data link layer (layer 2 or layer 3) to define the type of network to
run on. If Layer 3 is selected, click the drop-down menu to define either an IP or a prefix segmentation. Click to add additional
IP/prefix segments or Next to continue. Click Exit to discontinue the configuration process.
Page 10