D-Link NUCLIAS DNH-100 User Manual page 21

Nuclias Connect Software User Manual
Nuclias Connect
Ports
To make changes to a port or port group on the switch, first make sure the User Configuration is set to Standalone in the De-
vice Settings section. Next, check the boxes next to the port(s) you'd like to change. Click
Port Settings. Once the changes are made, click Apply to update the changes.
Field
Port Shutdown
Schedule
PoE Supply
Schedule
Port Type
In the Aggregate Management section, you can combine a minimum of 2 to 8 network connections into a link aggregation
group. From the Port-channel ID drop-down menu, select between 1 to 8. Next, select an aggregate type, LACP or Static.
From the Port list, select 2 to 8 ports to form a link aggregation group. Click Add to form, or Clear to cancel.
Under the Port-channel List, you'll see a summary list of link aggregation you have created. The summary shows the Port-
channel ID, Aggregate Type and Port numbers. Beneath the Action field, click
the changes.
Monitor
Description
Apply a time profile to the port shutdown function. The time profile is created in the time
profile page.
Apply a time profile to the PoE supply function.
Type: Switch ports can be configured as one of the following two types.
(1) Trunk: Trunk port allows the selected port to accept/pass 802.1Q tagged traffic.
• Native VLAN: All untagged traffic will be placed on this VLAN. The range is 1-4094.
• Allowed VLANs: Only selected VLANs are able to traverse this link. The range is All/1-
4094.
(2) Access: Access port places all traffic on its defined VLAN.
• Access VLAN: All traffic is placed on this VLAN. The range is 1-4094.
• Access policy: Apply a restriction policy to this port.
* Disabled: All devices can access this port.
* Static MAC Whitelist: Only the devices with MAC addresses specified in this list can
access this port.
* Port Security Delete-on-time Mode: All learned MAC addresses will be purged when an
entry is aged out or when the user manually deletes these entries. Users can configure
the number of dynamic learned entries via "Dynamic whitelist size limit". When the total
number of "Dynamic Whitelisted MACs" exceeds the value of "Dynamic Whitelist Size
Limit", all subsequent MAC address will be denied access to this port. A table displaying
dynamically learned MAC address is available.
* User defined access policy: Apply a policy name defined via Access Policy Page.
Switch
to edit, or
Page 21
Nuclias Connect Configuration
Device Detail Page
to edit. Scroll down to access the
to delete. Click Apply to save