D-Link NUCLIAS DNH-100 User Manual page 28

Nuclias Connect Software User Manual Nuclias Connect Configuration
Nuclias Connect Monitor Switch Device Detail Page
Tools
The Locate Device function can help identify unlabled switches by lighting up the LEDs on the switch. Click the Start button
to light up the switch. All LEDs will light up in green for 5 minutes. Click the Stop button to stop the light immediately. If a
device is located, a message "Locating device..." will be displayed under the Locate Device Result field. If no devices can be
located, a message "The device is unreachable" will be displayed. If the server receives failure message sent by the switch, a
message "Locate device failed" will be displayed.
The Copy Configuration function allows you to copy Configuration Mode, VLAN Configuration, IGMP Snooping, Port
Settings, Aggregate Management, and Mirror Management settings from your device to other device(s) in the network.
(Note that the two device needs to be the same model.)
To copy the configuration, select the switch(es) in the network that will be copied. Click the Copy button to copy the
configuration from your device to the selected device(s). A pop-up window will confirm once again. Click Copy to continue or
Cancel to stop.
Page 28