D-Link NUCLIAS DNH-100 User Manual page 65

Nuclias Connect Software User Manual Nuclias Connect Configuration
Quality of Service
The QoS feature can prioritize certain types of data with the use of differentiated services model. The priorities are marked in
each packet using Differentiated Services Code Point (DSCP) for traffic classification. To set the DSCP to CoS (Class of Service)
queue, choose a value from the drop-down menu and set a name for it.
Note: One DSCP value can only be mapped to one CoS queue value.
LBD Configuration
The Loopback Detection (LBD) feature can detect loops occurring on one or across different ports. In the LBD field, click En-
abled to turn on the feature. It is disabled by default.
DDP Configuration
The D-Link Discovery Protocol (DDP) is a communication protocol defined by D-Link. When enabled, your device will become
discoverable and can be managed by the DNC server. Features from DNA (D-Link Network Assistant) like IP settings, firmware
upgrade, reboot and reset function will also be supported.
In the DDP field, click Enabled to turn on, or Disabled to turn off this feature. It is enabled by default.
Local Credential Configuration
The username and password of your device is listed here.
Page 65