Nuclias Connect Software User Manual
Nuclias Connect
2.4GHz/5GHz/5GHz 2 (Tri-Band)
Once the settings are updated, the configuration must be uploaded to the access points. See "Profile Settings" on page 41 for
further information.
Nuclias Connect
LAN
Under the LAN tab, users can enable or disable STP (Spanning tree). STP can help ensure that no loops are created when you
have redundant paths in your network. Navigate to Configuration > Profile Settings > [Site] > [Network] > Access Point >
Performance > LAN. Note that only access point with multi LAN ports can apply this setting.
Once the settings are updated, the configuration must be uploaded to the access points. See "Profile Settings" on page 69 for
further information.
Configuration Profile Settings Access Point
Configuration Profile Settings Access Point
Page 53
Nuclias Connect Configuration
Performance
Performance