D-Link NUCLIAS DNH-100 User Manual page 114

Nuclias Connect Software User Manual
The Wireless settings menu is listed in the following figure.
Parameter
Cancel
DAP
2.4G SSID
SSID-#
SSID Name
Security
5G SSID
SSID-#
SSID Name
Security
Wireless Information
Radio Band
Radio 2.4G
Mode
Radio 5G Mode Tap to select a specific 5G radio mode: Mixed 802.11n, 80211a; 802.11a Only;
Country Code
Copy & Save Configuration
Apply
Configuration
Save
Configuration
Nuclias Connect App
Description
Tap to discard any changes and continue the process.
Displays the model name and IP address of the AP device.
Tap the slide button to enable or disable the SSID. The # character indicates
the identifying number of the SSID.
Tap to change the current name of the SSID.
Tap to select a specific security protocol: Open System (default), WPA-
Personal, or WPA-Enterprise.
Tap the slide button to enable or disable the SSID. The # character indicates
the identifying number of the SSID.
Tap to change the current name of the SSID.
Tap to select a specific security protocol: Open System (default), WPA-
Personal, or WPA-Enterprise.
Tap to select a specific radio band: Off, 2.4G, 5G, or 2.4G / 5G.
Tap to select a specific 2.4G radio mode: Mixed 802.11n, 80211g and 802.11b;
Mixed 802.11g, 802.11b; 802.11n Only.
802.11n; Mixed 802.11ac.
Displays the assigned country designation for the AP.
Tap to select an alternate discovered AP device to push the current
configuration.
Tap to name and archive the current configuration profile.
Page 114
Appendix