Following A Route - Raymarine E120W Reference Manual

72

Following a route

When you are following a route the active route is shown on all chart windows. On a
networked system, an active route is shown and can be controlled from all the displays.
When the distance to the next waypoint in the route is less than that specified for the
arrival alarm radius (see
to the target (defined by a line passing through the waypoint and perpendicular to the
route leg), a warning dialog is displayed and an alarm sounds (see
alarm is acknowledged the next waypoint is selected, the display updates to indicate
the next leg of the route and the system sends the new navigation data to the
autopilot.
There are several ways to select the follow route option:
• Using Quick Route.
• Using the cursor.
• Via the route list.
• In reverse order.
4nm
WAYPOINT
You can stop following an active route at any time by pressing
Note:
Follow using Quick Route
This option follows a route as soon as it is built. For more details see
page 267
North-Up (Relative Motion)
ADVANCE
STOP FOLLOW
Build your route
E-Series Networked Display Reference Manual
), or your boat reaches the closest point of approach
Target waypoint
highlighted
NORTH POINT
KNOLL
COWES
RESTART XTE
FOLLOW (QUICK)
ROUTE
page 65
). Once the
Course to active
waypoint
Local
STOP FOLLOW
page 68
.
.