Using The 3D Chart With A Fishfinder; Navigating With 3D Charts - Raymarine E120W Reference Manual

114

5.13 Using the 3D chart with a fishfinder

If you have a fishfinder in your system, you can display the transducer cone to indicate
the area that it covers on the 3D chart. This is particularly useful when fishing as it
enables you to compare the chart view with the information your fishfinder is showing you.
50 kHz
To display the transducer cone:
PRESENTATION...

5.14 Navigating with 3D charts

You can access navigation options when a 3D chart is active. This includes following a
route and selecting a waypoint from the waypoint list to start a GOTO.
Waypoint
arrival
circle
Active
waypoint
Course
of route
E-Series Networked Display Reference Manual
200 kHz
TRANS CONE
ON