Chart Cards; Uses Of The Chart Application - Raymarine E120W Reference Manual

48

Chart cards

To use your E-Series Display as a navigation aid, charts with the appropriate level of
detail for the geographic area you wish to navigate are required. The charts are
available in electronic format on Navionics Chart cards. Details of these cards and how
to obtain them is given on
When archiving data, Raymarine recommends that you only use SanDisk brand CF
memory cards. Other brands of CF memory cards may not work in your E-Series
Display.

4.2 Uses of the chart application

Once the heading and position data is available you can use your chart to:
• Find out where you are (see
• Interpret your surroundings (see
• Measure the distance and bearing between two points (see
• Place waypoints at specific locations (see
• Navigate to a specific point (see
• Build and follow a route (see
• Monitor where you are going (see
• Distinguish between fixed and moving objects using radar overlay (see
• Record where you have been (see
• Manage and edit routes and tracks (see
• View AIS data (see
Facilities are also provided to customize your chart application to your own particular
requirements and circumstances. You can:
• Alter the way the chart is drawn in relation to your boat and the direction you are
travelling in (chart orientation and motion mode).
• Manage and edit chart data you have entered.
• Control the level of detail displayed on-screen.
To change the data displayed in the data bar at the top /side of the screen,
Note:
please refer to page 270.
E-Series Networked Display Reference Manual
page iv
.
page 50
).
page 51
).
page 64
page 64
).
page 67
).
page 82
).
page 86
).
page 76
page 62
).
page 63
).
).
page 84
page 89
and ).
).