Navigating A Route - Raymarine E90W User Reference Handbook

Note: If a track break occurs, only the last segment is converted
to a route.
Building a route from a track
In the chart application:
1. Select the PLANNING softkey.
2. Select the MY TRACKS softkey.
The Track List is displayed.
3. Select the CREATE ROUTE FROM TRACK softkey.
4. Highlight the required track in the list.
5. Select the CREATE ROUTE FROM TRACK softkey.
6. Select the YES softkey to name the route, or NO to accept the
default route name.
On completion, the maximum deviation of the route from the
recorded track is displayed and the new route is added to the route
list. It can now be displayed, edited and erased etc. in the same
way as other routes in the system.
Building a route from a track displayed on the chart
In the chart application:
Using waypoints, routes and tracks
1. Position the cursor over the required track.
2. Select the CREATE ROUTE FROM TRACK softkey.
3. Select the YES softkey to name the route, or NO to accept the
default route name.
A route will be created and the current track will continue to be
recorded until you select the STOP TRACK softkey.

Navigating a route

You can follow any route stored on the display. When following
a route you visit each waypoint in order. You may also use the
follow route options in conjunction with a compatible autopilot to
automatically navigate along your chosen route.
There are a number of ways to select the follow route option:
• Using a temporary "Quick Route".
• From a selected waypoint or any leg within a route.
• Using a stored route within the route list.
You can also follow any route in reverse order.
Following a quick route
In the chart application:
61