Additional Information On The Chart - Raymarine E120W Reference Manual

Chapter 4: Using the Chart
A feature of the chart is 'autoscale'. If you select a chart scale that does not have
cartographic detail in some areas, the chart will use the most detailed level available
for the surrounding area and stretch it to fit the selected scale. This means that you will
never have blank or hatched areas on your screen. However there may be some mis-
alignment of objects which cross the chart boundary in this area.
To zoom in/out:
... about your boat:
FIND SHIP selected
... about the cursor:
FIND CURSOR selected

4.7 Additional information on the chart

Depending on the chart card you are using, you will also be able to view some or all of
the following addition information:
• Details of each cartographic object that is marked on the chart, including source
data for structures, lines, open sea areas etc.
• Details of ports, port and business services, tidal and current information, wrecks
and obstructions.
• Panoramic photos.
• Aerial photo overlay.
• Pilot books.
• Coastal roads.
For full details of the features available with each chart card type, please refer to
Note:
the Navionics website at
To change the set up options to control how selection of object information operates -
page 98
see
FIND
SHIP
FIND
CURSOR
www.navionics.com or navionics.it.
.
e.g.
3nm
OUT
RANGE
D6585-1
IN
Chart zooms in/out on your boat
Motion mode active
e.g.
1nm
OUT
RANGE
D6585-1
IN
Chart zooms in/out on the cursor
Motion mode inactive
If 3D SYNC is active, 3D chart
also centres on cursor
51
N-UP RM Sys
N-UP (RM) Sys