Other 3D Controls; Soft Keys - Raymarine E120W Reference Manual

106
Rotating and pitching
Select
Toggle control between the rotate and
pitch functions.
Adjust
Turn the rotary control to adjust the active
function:
• Rotate - rotates the view 0-360
• Pitch - changes the vertical angle of
view. (1-90 degrees)
The rotary control is always active to adjust pitch/rotation (even when the soft
Note:
key sub-menus are displayed, except when adjusting exaggeration).This is different to
most other uses of the rotary, which require you to press a soft key to enable adjust-
ment.

5.7 Other 3D controls

Soft keys

The soft keys control the application as follows:
To find your boat and
reinstate active
motion mode, forward
looking chart view.
FIND SHIP
To select center point
around which the chart
will move when rotary
control used.
To select an existing
route to follow or a
waypoint to go to.
GO TO...
To rotate or pitch chart around virtual eye
point, maintaining a relative position from
the virtual eye point to the on-screen boat.
Useful for aerial overview.
E-Series Networked Display Reference Manual
Press
0
.
To select how
rotary control
adjusts view
ADJUST ON ADJUST
EYE CENTER ROTATE
To rotate chart
o
(0-360 ).
Rotates or pitches chart To change vertical
around center-of-view angle of view.
cross. Useful for close (from sea-level to a
up views. full top-down aerial).
ADJUST
OR
ROTATE PITCH
Turn
To adjust presentation options:
Transducer cone
Depth scale
Direction of view
Exaggeration
Vessel offset
Declutter
Waypoint name (ON/OFF)
PRESENTATION...
PITCH