Editing The Selected Route - Raymarine E120W Reference Manual

Chapter 4: Using the Chart

Editing the selected route

Once you have selected the appropriate route (see previous section) you can proceed
to edit it.
Reversing a route
You can reverse the course of a route:
3
Select appropriate
route with cursor
For details of how to reverse and immediately follow a route, see page 73.
Note:
Changing the course of a route
You can amend the course of a route by:
• Adding a waypoint to the beginning or end of the route or between two existing
waypoints.
• Moving a waypoint within a route.
• Removing a waypoint.
You can effect these changes either via the Make Route dialog box or by selecting the
route on screen and then using the appropriate soft keys (not applicable when adding
a waypoint at the beginning of a route).
You will not be able to edit the waypoint that you are currently navigating to
Note:
(target waypoint).
Add a waypoint at the beginning of a route
This option changes the course of a route by adding an existing waypoint to the start of
the route:
1. Select the appropriate route for editing (see
2. Display the Make Route screen:
AMEND ROUTE
COURSE...
4
2
1
BayView
USE WAYPOINT
REVERSE ROUTE
page 76
).
Waypoints
Harbour Ent.
LIST... Midchannel
Outer Harbour
Pierhead
Waypoint 4
0
50 16'.75N
001 0 6'.095W
The Make Route screen is displayed
77
BayView
1
3
2
4
Waypoints renumber
and route name moves
Make Route
Sunday tour
01 Midchannel
02 Outer Harbour
03 Harbour Ent.
0
50 47'.356N
001 0 6'.604W