Changing Waypoint Details; Moving A Waypoint - Raymarine E120W Reference Manual

Chapter 3: Working with Waypoints

Changing waypoint details

When a waypoint is created it is assigned a default name, symbol and group. You can
change these details to suit your needs and add a comment if required. This is
particularly useful when you are managing large numbers of waypoints.
To change the details of a waypoint:
1. Select the detail you wish to edit:
Select required waypoint with
cursor or via waypoint list
2. Edit the selected detail:
e.g.
EDIT SYMBOL
Soft key reflects
highlighted field
If you make a mistake whilst editing, press CANCEL.
Note:

Moving a waypoint

You can move any waypoint (except the active one) to a new position. There are two
methods of moving a waypoint:
... by entering new coordinates
If you know the new co-ordinates, bearing or range for the particular waypoint, you
can enter this information by editing the waypoint as described in the previous section.
... by dragging the waypoint to a new position
WPT
Select waypoint
for moving
To abandon the move, press CANCEL.
Note:
WPT
Or
Waypoint List
Repeat for other fields, if necessary
Edit Waypoint
Edit details as required using:
Soft key ,
MOVE WAYPOINT
VIEW AND EDIT
DETAILS
OK
To save
and/or
WPT WPT
Drag waypoint
to new location
39
Edit Waypoint
Highlight field
for changing
OK
To save and
exit editing
PLACE WAYPOINT