Raymarine E120W Reference Manual page 198

182
Engine room
Cycling through the video inputs
You can set up your video application to automatically cycle through the images being
received. This is particularly useful if you have on-board cameras and wish to use them
to obtain a regular overview of your boat, engine room etc.
Setting up a video cycle
To specify which video inputs are to be included in the cycle and their order:
1. Open the Video Setup Menu, as described on
2. Highlight and select Cycle 1:
Cycle 1
Cycle 2
Cycle 3
Cycle 4
Cycle Period
3. Repeat this process for Cycle 2, 3 and 4.
If you wish to exclude an input, switch its status to NONE.
Note:
Setting up the cycle period
By default the cycle period is 10 seconds. This can be changed (1to 99 seconds) if
required.
To specify the number of seconds between shots in the cycle:
1. Open the Video Setup Menu, as described on
2. Specify the cycle period:
Cycle 1
Cycle 2
Cycle 3
Cycle 4
Cycle Period
Video 1...
Video 2...
Video 3...
Video 4...
Bridge
Video Setup Menu
Engine Room
Bridge
Aft
Stern
10secs
Select CYCLE 1
Video Setup Menu
Engine Room
Bridge
Aft
Stern
10secs
COMPOSITE VIDEO 1
COMPOSITE VIDEO 2
COMPOSITE VIDEO 3
COMPOSITE VIDEO 4
Highlight CYCLE PERIOD
Select CYCLE PERIOD
E-Series Networked Display Reference Manual
Aft Stern
page 180
.
Engine Room
Bridge
Aft
Stern
None
Select required
input for Cycle 1
page 180
.
Example:
17s
Adjust value
as required
PRESENTATION
OK
x2
OK
x2